Justin McKelvey

Justin McKelvey

Ran snowboard shops. Taught myself to code. Now I build AI that does real work.

• Vibe Code Rescue • 6 min read •

Railway Pricing (2026): Hobby $5, Pro $20, and What a Real App Actually Costs

Quick Answer

Railway costs $5 a month on Hobby or $20 on Pro, and those are minimums that count as credit, not fees on top. Past the credit you pay by the second: about $20 a month for a fully busy vCPU and $10 a month per GB of memory, plus $0.05 per GB of outbound traffic. A small app with a database usually lands at $6 to $10 a month on Hobby; an app with a worker and Postgres closer to $26.

Prices from railway.com/pricing, read November 16, 2026 · Author: Justin McKelvey, AI consultant, former CTO at an AI startup, 50+ products shipped

TL;DR: you're not paying for traffic, you're paying for memory

Every Railway pricing explainer lists the per-second rates and stops there, which is useless, because nobody thinks in $0.00000386 per GB-second. Multiply it out and the answer is boring and important: memory you hold all month is most of your bill, and traffic barely shows up until you're big.

This site runs on Railway: one Rails service with SQLite on a volume, no Redis, no separate database server. That design choice is a pricing decision as much as a technical one, and the math below shows why.

Railway plans and prices (as of November 2026)

Plan Price Per-service ceiling Storage What you actually get
Free $0 (30-day trial with $5 credit, then $1/month) 1 vCPU / 0.5 GB RAM 0.5 GB volume Community support. A demo, not a business.
Hobby $5 minimum usage, includes $5 credit 48 vCPU / 48 GB Up to 5 GB Single developer workspace, 7-day logs, 99.9% target
Pro $20 minimum usage, includes $20 credit 1,000 vCPU / 1 TB Up to 1 TB Unlimited seats, 30-day logs, Railway support, 99.99% target
Enterprise Custom Highest Highest SSO, HIPAA BAAs, 90-day logs, dedicated VMs, bring your own cloud

The "minimum usage" wording trips people up. On Hobby, if your app burns $3.20 of resources, you pay $5. If it burns $6.16, you pay $6.16, not $11.16.

The per-second rates, converted to a month

Resource Railway's rate Per 30-day month
CPU $0.00000772 per vCPU-second $20.01 per vCPU kept 100% busy
Memory $0.00000386 per GB-second $10.01 per GB held
Volume storage $0.00000006 per GB-second $0.16 per GB
Egress (outbound traffic) $0.05 per GB $5 per 100 GB
Object storage $0.015 per GB-month $1.50 per 100 GB, free egress

CPU is billed on what you use, and most small apps sit near idle, so their CPU line is pennies to a few dollars. Memory is billed on what the process holds, and a Rails or Node app holds its memory around the clock whether anyone's clicking or not.

Three worked bills

App Average usage CPU RAM Storage + egress Monthly bill
Small app: one service, SQLite on a volume 0.05 vCPU, 0.5 GB RAM, 1 GB volume $1.00 $5.00 $0.16 $6.16 on Hobby
Typical SaaS MVP: web + background worker + Postgres 0.2 vCPU, 2 GB RAM total, 5 GB volume, 20 GB egress $4.00 $20.01 $1.78 $25.79 (Hobby or Pro)
Busy app with real customers 1 vCPU, 4 GB RAM, 20 GB volume, 200 GB egress $20.01 $40.02 $13.11 $73.14 on Pro

In the middle row, memory is 78% of the bill. Splitting one app into three services (web, worker, database) roughly triples the memory line before a single extra user shows up. That's the honest case for boring architecture: fewer always-on processes, smaller bill.

How Railway compares to Vercel and Render

Vercel meters requests and function time, so a mostly idle front end can cost nothing while a full-stack app with a database gets expensive fast; the plan-by-plan numbers are on Vercel pricing, and whether its free tier holds up for a business is on is Vercel free. Render's free web services sleep when idle, which is why is Render free is a "yes, but" answer. The side-by-side with a 3-person team's bill is on Railway vs Vercel.

Sandboxes: the new line item for AI agents

Railway now sells Sandboxes & VMs, isolated Linux machines for agents, builds and untrusted code. They cost $0.00001929 per second for each vCPU and each GB of memory, about $50 per vCPU-month, 2.5 times the regular CPU rate. The catch flips the other way, though: you're billed only while the sandbox is actively running, never while it waits. An agent that works 2 hours a day (60 hours a month) on 1 vCPU and 1 GB costs about $8.33.

What to watch out for

  • Forgotten services. A staging copy or an old database you never deleted holds memory all month. Check the usage page for services you don't recognize.
  • Hobby for client work. Hobby is a single developer workspace with 7 days of logs. If a customer pays you, the $20 Pro minimum buys 30-day logs, support and a higher availability target.
  • Memory leaks become invoices. An app that creeps from 512 MB to 2 GB over a week costs four times as much by the end. Set a memory limit and restart policy.
  • Every push restarts the app. Deploys on a single service mean a short window of errors. Batch your deploys instead of pushing every small change.

If you built an app with an AI tool and the hosting bill, the crashes or the code have gotten away from you, that's what Vibe Code Rescue fixes.

Frequently asked questions about Railway pricing

How much does Railway cost per month?

Hobby is a $5 monthly minimum and Pro is a $20 monthly minimum; both minimums come back to you as usage credit. Above that you pay per second: Railway's pricing page (read November 16, 2026) works out to about $20 a month for a fully busy vCPU and $10 a month for each GB of memory your app holds. A small app usually lands between $5 and $10.

Is the Railway Hobby plan $5 plus usage?

No. The $5 is a minimum, and it includes $5 of usage. If your app uses $3.20 of resources you pay $5; if it uses $6.16 you pay $6.16. The same rule applies to Pro at $20.

Is Railway free?

Only to try. New accounts get a 30-day trial with $5 of credit. After that the Free plan is $1 a month and caps each service at 1 vCPU, 0.5 GB of RAM and 0.5 GB of volume storage, which is too small for most real apps with a database.

What's the difference between Railway Hobby and Pro?

Hobby is one developer workspace, up to 5 GB of storage, 7 days of logs and a 99.9% availability target. Pro adds unlimited workspace seats, up to 1 TB of storage, 30 days of logs, Railway support and a 99.99% target, with a $20 minimum instead of $5. Pro is the plan for anything a client or customer depends on.

Why is my Railway bill higher than I expected?

Usually memory. Railway charges for the RAM a service holds every second it runs, about $10 per GB per month, even when nobody is using the app. A worker and a database each hold their own memory, so three services at 0.5 to 1 GB each add up before traffic matters.

How much do Railway sandboxes cost?

Railway's Sandboxes & VMs (isolated Linux machines for agents, builds and untrusted code) cost $0.00001929 per second for each vCPU and each GB of memory while running, which Railway puts at about $50 per vCPU-month of active use, plus $0.05 per GB of egress. You aren't billed while a sandbox sits waiting.

Sources

  • Railway pricing, read November 16, 2026: Free, Hobby, Pro and Enterprise plans; CPU, memory, volume, egress, object storage and sandbox rates. Monthly figures are our conversion at 2,592,000 seconds per 30-day month.

Next step Get the free repo audit →

Free Resource Justin McKelvey

What your AI stack actually costs

Prices changed 3x this year. The always-current cost sheet: sticker price vs what heavy use actually costs for Cursor, Claude, Replit, Lovable, Bolt & more.

Frequently Asked Questions

How much does Railway cost per month?
Hobby is a $5 monthly minimum and Pro is a $20 monthly minimum; both minimums come back to you as usage credit. Above that you pay per second: Railway's pricing page (read November 16, 2026) works out to about $20 a month for a fully busy vCPU and $10 a month for each GB of memory your app holds. A small app usually lands between $5 and $10.
Is the Railway Hobby plan $5 plus usage?
No. The $5 is a minimum, and it includes $5 of usage. If your app uses $3.20 of resources you pay $5; if it uses $6.16 you pay $6.16. The same rule applies to Pro at $20.
Is Railway free?
Only to try. New accounts get a 30-day trial with $5 of credit. After that the Free plan is $1 a month and caps each service at 1 vCPU, 0.5 GB of RAM and 0.5 GB of volume storage, which is too small for most real apps with a database.
What's the difference between Railway Hobby and Pro?
Hobby is one developer workspace, up to 5 GB of storage, 7 days of logs and a 99.9% availability target. Pro adds unlimited workspace seats, up to 1 TB of storage, 30 days of logs, Railway support and a 99.99% target, with a $20 minimum instead of $5. Pro is the plan for anything a client or customer depends on.
Why is my Railway bill higher than I expected?
Usually memory. Railway charges for the RAM a service holds every second it runs, about $10 per GB per month, even when nobody is using the app. A worker and a database each hold their own memory, so three services at 0.5 to 1 GB each add up before traffic matters.
How much do Railway sandboxes cost?
Railway's Sandboxes & VMs (isolated Linux machines for agents, builds and untrusted code) cost $0.00001929 per second for each vCPU and each GB of memory while running, which Railway puts at about $50 per vCPU-month of active use, plus $0.05 per GB of egress. You aren't billed while a sandbox sits waiting.

More on Vibe Code Rescue

Render Pricing (2026): Hobby $0, Pro $25 + Compute, and 3 Real App Bills

Render pricing has two parts: a workspace plan (Hobby $0, Pro $25, Scale $499 a month) and a fixed price for every service you run ($7 for a small web service, $6 to $40 for Postgres). A small app costs about $13 a month; a team app with a worker, a database and Redis about $107.

5 min

Claude Code Tutorial (2026): What to Learn, in What Order, and the Free Courses Worth Your Time

Anthropic's own free courses teach Claude Code in about 5 hours and 15 minutes across five of them. The courses are free, the tool isn't: you need Claude Pro or higher. Here's the order to take them in, the week of real work that goes in the middle, and the tutorial advice Anthropic now says to stop following.

7 min

What Is Prompt Injection? How It Hits the AI Feature You Added to Your Lovable or Cursor App

Prompt injection is when text your AI feature reads carries instructions the model follows instead of yours. OWASP ranks it the #1 risk for AI apps, and there's no full fix. Here's what it looks like in a founder's app, three real cases, and the fixes that limit the damage.

8 min

Is Supabase Secure? Yes, If RLS Is On: How to Check Yours in 5 Minutes (2026)

Supabase the platform is secure: SOC 2 Type 2, encrypted data, regular pen tests. Your app on Supabase is only as secure as its Row Level Security rules, and those are yours to set. Here's what Supabase covers, what you own, how RLS works in plain English, and a 5-minute check for a Lovable or Bolt app.

6 min
Justin McKelvey, Austin, TX

Written by

Justin McKelvey

I spent 12 years running snowboard and mountain-bike shops in Colorado, then taught myself to code. Since then: 50+ products shipped, Head of Product at a national sports platform, CTO at an AI startup. Now I put AI to work in real businesses in Austin, TX and remote, and write down what actually works.

Work with me

Want more help? Get a free 20-min repo audit · Grab the real AI stack cost sheet